/******************************************************************************* * Copyright (c) 2009, 2022 IBM Corp., Ian Craggs and others * * All rights reserved. This program and the accompanying materials * are made available under the terms of the Eclipse Public License v2.0 * and Eclipse Distribution License v1.0 which accompany this distribution. * * The Eclipse Public License is available at * https://www.eclipse.org/legal/epl-2.0/ * and the Eclipse Distribution License is available at * http://www.eclipse.org/org/documents/edl-v10.php. * * Contributors: * Ian Craggs - initial API and implementation * Ian Craggs, Allan Stockdill-Mander - SSL connections * Ian Craggs - multiple server connection support * Ian Craggs - MQTT 3.1.1 support * Ian Craggs - fix for bug 444103 - success/failure callbacks not invoked * Ian Craggs - automatic reconnect and offline buffering (send while disconnected) * Ian Craggs - binary will message * Ian Craggs - binary password * Ian Craggs - remove const on eyecatchers #168 * Ian Craggs - MQTT 5.0 *******************************************************************************/ /********************************************************************/ /** * @cond MQTTAsync_main * @mainpage Asynchronous MQTT client library for C (MQTTAsync) * * © Copyright 2009, 2022 IBM Corp., Ian Craggs and others * * @brief An Asynchronous MQTT client library for C. * * An MQTT client application connects to MQTT-capable servers. * A typical client is responsible for collecting information from a telemetry * device and publishing the information to the server. It can also subscribe * to topics, receive messages, and use this information to control the * telemetry device. * * MQTT clients implement the published MQTT v3 protocol. You can write your own * API to the MQTT protocol using the programming language and platform of your * choice. This can be time-consuming and error-prone. * * To simplify writing MQTT client applications, this library encapsulates * the MQTT v3 protocol for you. Using this library enables a fully functional * MQTT client application to be written in a few lines of code. * The information presented here documents the API provided * by the Asynchronous MQTT Client library for C. * * Using the client
* Applications that use the client library typically use a similar structure: *

Create a client object
Set the options to connect to an MQTT server
Set up callback functions
Connect the client to an MQTT server
Subscribe to any topics the client needs to receive
Repeat until finished:

Publish any messages the client needs to
Handle any incoming messages

Disconnect the client
Free any memory being used by the client

* Some simple examples are shown here: *

@ref publish
@ref subscribe

* Additional information about important concepts is provided here: *

@ref async
@ref wildcard
@ref qos
@ref tracing
@ref auto_reconnect
@ref offline_publish

* @endcond */ /* /// @cond EXCLUDE */ #if !defined(MQTTASYNC_H) #define MQTTASYNC_H #if defined(__cplusplus) extern "C" { #endif #include /* /// @endcond */ #include "MQTTExportDeclarations.h" #include "MQTTProperties.h" #include "MQTTReasonCodes.h" #include "MQTTSubscribeOpts.h" #if !defined(NO_PERSISTENCE) #include "MQTTClientPersistence.h" #endif /** * Return code: No error. Indicates successful completion of an MQTT client * operation. */ #define MQTTASYNC_SUCCESS 0 /** * Return code: A generic error code indicating the failure of an MQTT client * operation. */ #define MQTTASYNC_FAILURE -1 /* error code -2 is MQTTAsync_PERSISTENCE_ERROR */ #define MQTTASYNC_PERSISTENCE_ERROR -2 /** * Return code: The client is disconnected. */ #define MQTTASYNC_DISCONNECTED -3 /** * Return code: The maximum number of messages allowed to be simultaneously * in-flight has been reached. */ #define MQTTASYNC_MAX_MESSAGES_INFLIGHT -4 /** * Return code: An invalid UTF-8 string has been detected. */ #define MQTTASYNC_BAD_UTF8_STRING -5 /** * Return code: A NULL parameter has been supplied when this is invalid. */ #define MQTTASYNC_NULL_PARAMETER -6 /** * Return code: The topic has been truncated (the topic string includes * embedded NULL characters). String functions will not access the full topic. * Use the topic length value to access the full topic. */ #define MQTTASYNC_TOPICNAME_TRUNCATED -7 /** * Return code: A structure parameter does not have the correct eyecatcher * and version number. */ #define MQTTASYNC_BAD_STRUCTURE -8 /** * Return code: A qos parameter is not 0, 1 or 2 */ #define MQTTASYNC_BAD_QOS -9 /** * Return code: All 65535 MQTT msgids are being used */ #define MQTTASYNC_NO_MORE_MSGIDS -10 /** * Return code: the request is being discarded when not complete */ #define MQTTASYNC_OPERATION_INCOMPLETE -11 /** * Return code: no more messages can be buffered */ #define MQTTASYNC_MAX_BUFFERED_MESSAGES -12 /** * Return code: Attempting SSL connection using non-SSL version of library */ #define MQTTASYNC_SSL_NOT_SUPPORTED -13 /** * Return code: protocol prefix in serverURI should be: * @li @em tcp:// or @em mqtt:// - Insecure TCP * @li @em ssl:// or @em mqtts:// - Encrypted SSL/TLS * @li @em ws:// - Insecure websockets * @li @em wss:// - Secure web sockets * * The TLS enabled prefixes (ssl, mqtts, wss) are only valid if the TLS * version of the library is linked with. */ #define MQTTASYNC_BAD_PROTOCOL -14 /** * Return code: don't use options for another version of MQTT */ #define MQTTASYNC_BAD_MQTT_OPTION -15 /** * Return code: call not applicable to the client's version of MQTT */ #define MQTTASYNC_WRONG_MQTT_VERSION -16 /** * Return code: 0 length will topic */ #define MQTTASYNC_0_LEN_WILL_TOPIC -17 /* * Return code: connect or disconnect command ignored because there is already a connect or disconnect * command at the head of the list waiting to be processed. Use the onSuccess/onFailure callbacks to wait * for the previous connect or disconnect command to be complete. */ #define MQTTASYNC_COMMAND_IGNORED -18 /* * Return code: maxBufferedMessages in the connect options must be >= 0 */ #define MQTTASYNC_MAX_BUFFERED -19 /** * Default MQTT version to connect with. Use 3.1.1 then fall back to 3.1 */ #define MQTTVERSION_DEFAULT 0 /** * MQTT version to connect with: 3.1 */ #define MQTTVERSION_3_1 3 /** * MQTT version to connect with: 3.1.1 */ #define MQTTVERSION_3_1_1 4 /** * MQTT version to connect with: 5 */ #define MQTTVERSION_5 5 /** * Bad return code from subscribe, as defined in the 3.1.1 specification */ #define MQTT_BAD_SUBSCRIBE 0x80 /** * Initialization options */ typedef struct { /** The eyecatcher for this structure. Must be MQTG. */ char struct_id[4]; /** The version number of this structure. Must be 0 */ int struct_version; /** 1 = we do openssl init, 0 = leave it to the application */ int do_openssl_init; } MQTTAsync_init_options; #define MQTTAsync_init_options_initializer { {'M', 'Q', 'T', 'G'}, 0, 0 } /** * Global init of mqtt library. Call once on program start to set global behaviour. * handle_openssl_init - if mqtt library should handle openssl init (1) or rely on the caller to init it before using mqtt (0) */ LIBMQTT_API void MQTTAsync_global_init(MQTTAsync_init_options* inits); /** * A handle representing an MQTT client. A valid client handle is available * following a successful call to MQTTAsync_create(). */ typedef void* MQTTAsync; /** * A value representing an MQTT message. A token is returned to the * client application when a message is published. The token can then be used to * check that the message was successfully delivered to its destination (see * MQTTAsync_publish(), * MQTTAsync_publishMessage(), * MQTTAsync_deliveryComplete(), and * MQTTAsync_getPendingTokens()). */ typedef int MQTTAsync_token; /** * A structure representing the payload and attributes of an MQTT message. The * message topic is not part of this structure (see MQTTAsync_publishMessage(), * MQTTAsync_publish(), MQTTAsync_receive(), MQTTAsync_freeMessage() * and MQTTAsync_messageArrived()). */ typedef struct { /** The eyecatcher for this structure. must be MQTM. */ char struct_id[4]; /** The version number of this structure. Must be 0 or 1. * 0 indicates no message properties */ int struct_version; /** The length of the MQTT message payload in bytes. */ int payloadlen; /** A pointer to the payload of the MQTT message. */ void* payload; /** * The quality of service (QoS) assigned to the message. * There are three levels of QoS: *

QoS0: Fire and forget - the message may not be delivered
QoS1: At least once - the message will be delivered, but may be * delivered more than once in some circumstances.
QoS2: Once and one only - the message will be delivered exactly once.

*/ int qos; /** * The retained flag serves two purposes depending on whether the message * it is associated with is being published or received. * * retained = true
* For messages being published, a true setting indicates that the MQTT * server should retain a copy of the message. The message will then be * transmitted to new subscribers to a topic that matches the message topic. * For subscribers registering a new subscription, the flag being true * indicates that the received message is not a new one, but one that has * been retained by the MQTT server. * * retained = false
* For publishers, this indicates that this message should not be retained * by the MQTT server. For subscribers, a false setting indicates this is * a normal message, received as a result of it being published to the * server. */ int retained; /** * The dup flag indicates whether or not this message is a duplicate. * It is only meaningful when receiving QoS1 messages. When true, the * client application should take appropriate action to deal with the * duplicate message. This is an output parameter only. */ int dup; /** The message identifier is reserved for internal use by the * MQTT client and server. It is an output parameter only - writing * to it will serve no purpose. It contains the MQTT message id of * an incoming publish message. */ int msgid; /** * The MQTT V5 properties associated with the message. */ MQTTProperties properties; } MQTTAsync_message; #define MQTTAsync_message_initializer { {'M', 'Q', 'T', 'M'}, 1, 0, NULL, 0, 0, 0, 0, MQTTProperties_initializer } /** * This is a callback function. The client application * must provide an implementation of this function to enable asynchronous * receipt of messages. The function is registered with the client library by * passing it as an argument to MQTTAsync_setCallbacks(). It is * called by the client library when a new message that matches a client * subscription has been received from the server. This function is executed on * a separate thread to the one on which the client application is running. * * Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be * called within this callback. * @param context A pointer to the context value originally passed to * MQTTAsync_setCallbacks(), which contains any application-specific context. * @param topicName The topic associated with the received message. * @param topicLen The length of the topic if there are one * more NULL characters embedded in topicName, otherwise topicLen * is 0. If topicLen is 0, the value returned by strlen(topicName) * can be trusted. If topicLen is greater than 0, the full topic name * can be retrieved by accessing topicName as a byte array of length * topicLen. * @param message The MQTTAsync_message structure for the received message. * This structure contains the message payload and attributes. * @return This function must return 0 or 1 indicating whether or not * the message has been safely received by the client application.
* Returning 1 indicates that the message has been successfully handled. * To free the message storage, ::MQTTAsync_freeMessage must be called. * To free the topic name storage, ::MQTTAsync_free must be called.
* Returning 0 indicates that there was a problem. In this * case, the client library will reinvoke MQTTAsync_messageArrived() to * attempt to deliver the message to the application again. * Do not free the message and topic storage when returning 0, otherwise * the redelivery will fail. */ typedef int MQTTAsync_messageArrived(void* context, char* topicName, int topicLen, MQTTAsync_message* message); /** * This is a callback function. The client application * must provide an implementation of this function to enable asynchronous * notification of delivery of messages to the server. The function is * registered with the client library by passing it as an argument to MQTTAsync_setCallbacks(). * It is called by the client library after the client application has * published a message to the server. It indicates that the necessary * handshaking and acknowledgements for the requested quality of service (see * MQTTAsync_message.qos) have been completed. This function is executed on a * separate thread to the one on which the client application is running. * * Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be * called within this callback. * @param context A pointer to the context value originally passed to * MQTTAsync_setCallbacks(), which contains any application-specific context. * @param token The ::MQTTAsync_token associated with * the published message. Applications can check that all messages have been * correctly published by matching the tokens returned from calls to * MQTTAsync_send() and MQTTAsync_sendMessage() with the tokens passed * to this callback. */ typedef void MQTTAsync_deliveryComplete(void* context, MQTTAsync_token token); /** * This is a callback function. The client application * must provide an implementation of this function to enable asynchronous * notification of the loss of connection to the server. The function is * registered with the client library by passing it as an argument to * MQTTAsync_setCallbacks(). It is called by the client library if the client * loses its connection to the server. The client application must take * appropriate action, such as trying to reconnect or reporting the problem. * This function is executed on a separate thread to the one on which the * client application is running. * * Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be * called within this callback. * @param context A pointer to the context value originally passed to * MQTTAsync_setCallbacks(), which contains any application-specific context. * @param cause The reason for the disconnection. * Currently, cause is always set to NULL. */ typedef void MQTTAsync_connectionLost(void* context, char* cause); /** * This is a callback function, which will be called when the client * library successfully connects. This is superfluous when the connection * is made in response to a MQTTAsync_connect call, because the onSuccess * callback can be used. It is intended for use when automatic reconnect * is enabled, so that when a reconnection attempt succeeds in the background, * the application is notified and can take any required actions. * * Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be * called within this callback. * @param context A pointer to the context value originally passed to * MQTTAsync_setCallbacks(), which contains any application-specific context. * @param cause The reason for the disconnection. * Currently, cause is always set to NULL. */ typedef void MQTTAsync_connected(void* context, char* cause); /** * This is a callback function, which will be called when the client * library receives a disconnect packet from the server. This applies to MQTT V5 and above only. * * Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be * called within this callback. * @param context A pointer to the context value originally passed to * MQTTAsync_setCallbacks(), which contains any application-specific context. * @param properties the properties in the disconnect packet. * @param properties the reason code from the disconnect packet * Currently, cause is always set to NULL. */ typedef void MQTTAsync_disconnected(void* context, MQTTProperties* properties, enum MQTTReasonCodes reasonCode); /** * Sets the MQTTAsync_disconnected() callback function for a client. * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * * Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be * called within this callback. * @param context A pointer to any application-specific context. The * the context pointer is passed to each of the callback functions to * provide access to the context information in the callback. * @param co A pointer to an MQTTAsync_connected() callback * function. NULL removes the callback setting. * @return ::MQTTASYNC_SUCCESS if the callbacks were correctly set, * ::MQTTASYNC_FAILURE if an error occurred. */ LIBMQTT_API int MQTTAsync_setDisconnected(MQTTAsync handle, void* context, MQTTAsync_disconnected* co); /** The connect options that can be updated before an automatic reconnect. */ typedef struct { /** The eyecatcher for this structure. Will be MQCD. */ char struct_id[4]; /** The version number of this structure. Will be 0 */ int struct_version; /** * MQTT servers that support the MQTT v3.1 protocol provide authentication * and authorisation by user name and password. This is the user name parameter. * Set data to NULL to remove. To change, allocate new * storage with ::MQTTAsync_allocate - this will then be free later by the library. */ const char* username; /** * The password parameter of the MQTT authentication. * Set data to NULL to remove. To change, allocate new * storage with ::MQTTAsync_allocate - this will then be free later by the library. */ struct { int len; /**< binary password length */ const void* data; /**< binary password data */ } binarypwd; } MQTTAsync_connectData; #define MQTTAsync_connectData_initializer {{'M', 'Q', 'C', 'D'}, 0, NULL, {0, NULL}} /** * This is a callback function which will allow the client application to update the * connection data. * @param data The connection data which can be modified by the application. * @return Return a non-zero value to update the connect data, zero to keep the same data. */ typedef int MQTTAsync_updateConnectOptions(void* context, MQTTAsync_connectData* data); /** * Sets the MQTTAsync_updateConnectOptions() callback function for a client. * @param handle A valid client handle from a successful call to MQTTAsync_create(). * @param context A pointer to any application-specific context. The * the context pointer is passed to each of the callback functions to * provide access to the context information in the callback. * @param co A pointer to an MQTTAsync_updateConnectOptions() callback * function. NULL removes the callback setting. */ LIBMQTT_API int MQTTAsync_setUpdateConnectOptions(MQTTAsync handle, void* context, MQTTAsync_updateConnectOptions* co); /** * Sets the MQTTPersistence_beforeWrite() callback function for a client. * @param handle A valid client handle from a successful call to MQTTAsync_create(). * @param context A pointer to any application-specific context. The * the context pointer is passed to the callback function to * provide access to the context information in the callback. * @param co A pointer to an MQTTPersistence_beforeWrite() callback * function. NULL removes the callback setting. */ LIBMQTT_API int MQTTAsync_setBeforePersistenceWrite(MQTTAsync handle, void* context, MQTTPersistence_beforeWrite* co); /** * Sets the MQTTPersistence_afterRead() callback function for a client. * @param handle A valid client handle from a successful call to MQTTAsync_create(). * @param context A pointer to any application-specific context. The * the context pointer is passed to the callback function to * provide access to the context information in the callback. * @param co A pointer to an MQTTPersistence_beforeWrite() callback * function. NULL removes the callback setting. */ LIBMQTT_API int MQTTAsync_setAfterPersistenceRead(MQTTAsync handle, void* context, MQTTPersistence_afterRead* co); /** The data returned on completion of an unsuccessful API call in the response callback onFailure. */ typedef struct { /** A token identifying the failed request. */ MQTTAsync_token token; /** A numeric code identifying the error. */ int code; /** Optional text explaining the error. Can be NULL. */ const char *message; } MQTTAsync_failureData; /** The data returned on completion of an unsuccessful API call in the response callback onFailure. */ typedef struct { /** The eyecatcher for this structure. Will be MQFD. */ char struct_id[4]; /** The version number of this structure. Will be 0 */ int struct_version; /** A token identifying the failed request. */ MQTTAsync_token token; /** The MQTT reason code returned. */ enum MQTTReasonCodes reasonCode; /** The MQTT properties on the ack, if any. */ MQTTProperties properties; /** A numeric code identifying the MQTT client library error. */ int code; /** Optional further text explaining the error. Can be NULL. */ const char *message; /** Packet type on which the failure occurred - used for publish QoS 1/2 exchanges*/ int packet_type; } MQTTAsync_failureData5; #define MQTTAsync_failureData5_initializer {{'M', 'Q', 'F', 'D'}, 0, 0, MQTTREASONCODE_SUCCESS, MQTTProperties_initializer, 0, NULL, 0} /** The data returned on completion of a successful API call in the response callback onSuccess. */ typedef struct { /** A token identifying the successful request. Can be used to refer to the request later. */ MQTTAsync_token token; /** A union of the different values that can be returned for subscribe, unsubscribe and publish. */ union { /** For subscribe, the granted QoS of the subscription returned by the server. * Also for subscribeMany, if only 1 subscription was requested. */ int qos; /** For subscribeMany, if more than one subscription was requested, * the list of granted QoSs of the subscriptions returned by the server. */ int* qosList; /** For publish, the message being sent to the server. */ struct { MQTTAsync_message message; /**< the message being sent to the server */ char* destinationName; /**< the topic destination for the message */ } pub; /* For connect, the server connected to, MQTT version used, and sessionPresent flag */ struct { char* serverURI; /**< the connection string of the server */ int MQTTVersion; /**< the version of MQTT being used */ int sessionPresent; /**< the session present flag returned from the server */ } connect; } alt; } MQTTAsync_successData; /** The data returned on completion of a successful API call in the response callback onSuccess. */ typedef struct { char struct_id[4]; /**< The eyecatcher for this structure. Will be MQSD. */ int struct_version; /**< The version number of this structure. Will be 0 */ /** A token identifying the successful request. Can be used to refer to the request later. */ MQTTAsync_token token; enum MQTTReasonCodes reasonCode; /**< MQTT V5 reason code returned */ MQTTProperties properties; /**< MQTT V5 properties returned, if any */ /** A union of the different values that can be returned for subscribe, unsubscribe and publish. */ union { /** For subscribeMany, the list of reasonCodes returned by the server. */ struct { int reasonCodeCount; /**< the number of reason codes in the reasonCodes array */ enum MQTTReasonCodes* reasonCodes; /**< an array of reasonCodes */ } sub; /** For publish, the message being sent to the server. */ struct { MQTTAsync_message message; /**< the message being sent to the server */ char* destinationName; /**< the topic destination for the message */ } pub; /* For connect, the server connected to, MQTT version used, and sessionPresent flag */ struct { char* serverURI; /**< the connection string of the server */ int MQTTVersion; /**< the version of MQTT being used */ int sessionPresent; /**< the session present flag returned from the server */ } connect; /** For unsubscribeMany, the list of reasonCodes returned by the server. */ struct { int reasonCodeCount; /**< the number of reason codes in the reasonCodes array */ enum MQTTReasonCodes* reasonCodes; /**< an array of reasonCodes */ } unsub; } alt; } MQTTAsync_successData5; #define MQTTAsync_successData5_initializer {{'M', 'Q', 'S', 'D'}, 0, 0, MQTTREASONCODE_SUCCESS, MQTTProperties_initializer, {.sub={0,0}}} /** * This is a callback function. The client application * must provide an implementation of this function to enable asynchronous * notification of the successful completion of an API call. The function is * registered with the client library by passing it as an argument in * ::MQTTAsync_responseOptions. * * Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be * called within this callback. * @param context A pointer to the context value originally passed to * ::MQTTAsync_responseOptions, which contains any application-specific context. * @param response Any success data associated with the API completion. */ typedef void MQTTAsync_onSuccess(void* context, MQTTAsync_successData* response); /** * This is a callback function, the MQTT V5 version of ::MQTTAsync_onSuccess. * The client application * must provide an implementation of this function to enable asynchronous * notification of the successful completion of an API call. The function is * registered with the client library by passing it as an argument in * ::MQTTAsync_responseOptions. * * Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be * called within this callback. * @param context A pointer to the context value originally passed to * ::MQTTAsync_responseOptions, which contains any application-specific context. * @param response Any success data associated with the API completion. */ typedef void MQTTAsync_onSuccess5(void* context, MQTTAsync_successData5* response); /** * This is a callback function. The client application * must provide an implementation of this function to enable asynchronous * notification of the unsuccessful completion of an API call. The function is * registered with the client library by passing it as an argument in * ::MQTTAsync_responseOptions. * * Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be * called within this callback. * @param context A pointer to the context value originally passed to * ::MQTTAsync_responseOptions, which contains any application-specific context. * @param response Failure data associated with the API completion. */ typedef void MQTTAsync_onFailure(void* context, MQTTAsync_failureData* response); /** * This is a callback function, the MQTT V5 version of ::MQTTAsync_onFailure. * The application must provide an implementation of this function to enable asynchronous * notification of the unsuccessful completion of an API call. The function is * registered with the client library by passing it as an argument in * ::MQTTAsync_responseOptions. * * Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be * called within this callback. * @param context A pointer to the context value originally passed to * ::MQTTAsync_responseOptions, which contains any application-specific context. * @param response Failure data associated with the API completion. */ typedef void MQTTAsync_onFailure5(void* context, MQTTAsync_failureData5* response); /** Structure to define call options. For MQTT 5.0 there is input data as well as that * describing the response method. So there is now also a synonym ::MQTTAsync_callOptions * to better reflect the use. This responseOptions name is kept for backward * compatibility. */ typedef struct MQTTAsync_responseOptions { /** The eyecatcher for this structure. Must be MQTR */ char struct_id[4]; /** The version number of this structure. Must be 0 or 1 * if 0, no MQTTV5 options */ int struct_version; /** * A pointer to a callback function to be called if the API call successfully * completes. Can be set to NULL, in which case no indication of successful * completion will be received. */ MQTTAsync_onSuccess* onSuccess; /** * A pointer to a callback function to be called if the API call fails. * Can be set to NULL, in which case no indication of unsuccessful * completion will be received. */ MQTTAsync_onFailure* onFailure; /** * A pointer to any application-specific context. The * the context pointer is passed to success or failure callback functions to * provide access to the context information in the callback. */ void* context; /** * A token is returned from the call. It can be used to track * the state of this request, both in the callbacks and in future calls * such as ::MQTTAsync_waitForCompletion. This is output only - any * change by the application will be ignored. */ MQTTAsync_token token; /** * A pointer to a callback function to be called if the API call successfully * completes. Can be set to NULL, in which case no indication of successful * completion will be received. */ MQTTAsync_onSuccess5* onSuccess5; /** * A pointer to a callback function to be called if the API call successfully * completes. Can be set to NULL, in which case no indication of successful * completion will be received. */ MQTTAsync_onFailure5* onFailure5; /** * MQTT V5 input properties */ MQTTProperties properties; /* * MQTT V5 subscribe options, when used with subscribe only. */ MQTTSubscribe_options subscribeOptions; /* * MQTT V5 subscribe option count, when used with subscribeMany only. * The number of entries in the subscribe_options_list array. */ int subscribeOptionsCount; /* * MQTT V5 subscribe option array, when used with subscribeMany only. */ MQTTSubscribe_options* subscribeOptionsList; } MQTTAsync_responseOptions; #define MQTTAsync_responseOptions_initializer { {'M', 'Q', 'T', 'R'}, 1, NULL, NULL, 0, 0, NULL, NULL, MQTTProperties_initializer, MQTTSubscribe_options_initializer, 0, NULL} /** A synonym for responseOptions to better reflect its usage since MQTT 5.0 */ typedef struct MQTTAsync_responseOptions MQTTAsync_callOptions; #define MQTTAsync_callOptions_initializer MQTTAsync_responseOptions_initializer /** * This function sets the global callback functions for a specific client. * If your client application doesn't use a particular callback, set the * relevant parameter to NULL. Any necessary message acknowledgements and * status communications are handled in the background without any intervention * from the client application. If you do not set a messageArrived callback * function, you will not be notified of the receipt of any messages as a * result of a subscription. * * Note: The MQTT client must be disconnected when this function is * called. * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param context A pointer to any application-specific context. The * the context pointer is passed to each of the callback functions to * provide access to the context information in the callback. * @param cl A pointer to an MQTTAsync_connectionLost() callback * function. You can set this to NULL if your application doesn't handle * disconnections. * @param ma A pointer to an MQTTAsync_messageArrived() callback * function. If this callback is not set, an error will be returned. * You must set this callback because otherwise there would be * no way to deliver any incoming messages. * @param dc A pointer to an MQTTAsync_deliveryComplete() callback * function. You can set this to NULL if you do not want to check * for successful delivery. * @return ::MQTTASYNC_SUCCESS if the callbacks were correctly set, * ::MQTTASYNC_FAILURE if an error occurred. */ LIBMQTT_API int MQTTAsync_setCallbacks(MQTTAsync handle, void* context, MQTTAsync_connectionLost* cl, MQTTAsync_messageArrived* ma, MQTTAsync_deliveryComplete* dc); /** * This function sets the callback function for a connection lost event for * a specific client. Any necessary message acknowledgements and status * communications are handled in the background without any intervention * from the client application. * * Note: The MQTT client must be disconnected when this function is * called. * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param context A pointer to any application-specific context. The * the context pointer is passed the callback functions to provide * access to the context information in the callback. * @param cl A pointer to an MQTTAsync_connectionLost() callback * function. You can set this to NULL if your application doesn't handle * disconnections. * @return ::MQTTASYNC_SUCCESS if the callbacks were correctly set, * ::MQTTASYNC_FAILURE if an error occurred. */ LIBMQTT_API int MQTTAsync_setConnectionLostCallback(MQTTAsync handle, void* context, MQTTAsync_connectionLost* cl); /** * This function sets the callback function for a message arrived event for * a specific client. Any necessary message acknowledgements and status * communications are handled in the background without any intervention * from the client application. If you do not set a messageArrived callback * function, you will not be notified of the receipt of any messages as a * result of a subscription. * * Note: The MQTT client must be disconnected when this function is * called. * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param context A pointer to any application-specific context. The * the context pointer is passed to the callback functions to provide * access to the context information in the callback. * @param ma A pointer to an MQTTAsync_messageArrived() callback * function. You can set this to NULL if your application doesn't handle * receipt of messages. * @return ::MQTTASYNC_SUCCESS if the callbacks were correctly set, * ::MQTTASYNC_FAILURE if an error occurred. */ LIBMQTT_API int MQTTAsync_setMessageArrivedCallback(MQTTAsync handle, void* context, MQTTAsync_messageArrived* ma); /** * This function sets the callback function for a delivery complete event * for a specific client. Any necessary message acknowledgements and status * communications are handled in the background without any intervention * from the client application. * * Note: The MQTT client must be disconnected when this function is * called. * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param context A pointer to any application-specific context. The * the context pointer is passed to the callback functions to provide * access to the context information in the callback. * @param dc A pointer to an MQTTAsync_deliveryComplete() callback * function. You can set this to NULL if you do not want to check * for successful delivery. * @return ::MQTTASYNC_SUCCESS if the callbacks were correctly set, * ::MQTTASYNC_FAILURE if an error occurred. */ LIBMQTT_API int MQTTAsync_setDeliveryCompleteCallback(MQTTAsync handle, void* context, MQTTAsync_deliveryComplete* dc); /** * Sets the MQTTAsync_connected() callback function for a client. * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param context A pointer to any application-specific context. The * the context pointer is passed to each of the callback functions to * provide access to the context information in the callback. * @param co A pointer to an MQTTAsync_connected() callback * function. NULL removes the callback setting. * @return ::MQTTASYNC_SUCCESS if the callbacks were correctly set, * ::MQTTASYNC_FAILURE if an error occurred. */ LIBMQTT_API int MQTTAsync_setConnected(MQTTAsync handle, void* context, MQTTAsync_connected* co); /** * Reconnects a client with the previously used connect options. Connect * must have previously been called for this to work. * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @return ::MQTTASYNC_SUCCESS if the callbacks were correctly set, * ::MQTTASYNC_FAILURE if an error occurred. */ LIBMQTT_API int MQTTAsync_reconnect(MQTTAsync handle); /** * This function creates an MQTT client ready for connection to the * specified server and using the specified persistent storage (see * MQTTAsync_persistence). See also MQTTAsync_destroy(). * @param handle A pointer to an ::MQTTAsync handle. The handle is * populated with a valid client reference following a successful return from * this function. * @param serverURI A null-terminated string specifying the server to * which the client will connect. It takes the form * protocol://host:port where protocol must be: *
* @em tcp:// or @em mqtt:// - Insecure TCP *
* @em ssl:// or @em mqtts:// - Encrypted SSL/TLS *
* @em ws:// - Insecure websockets *
* @em wss:// - Secure web sockets *
* The TLS enabled prefixes (ssl, mqtts, wss) are only valid if a TLS * version of the library is linked with. * For host, you can specify either an IP address or a host name. For * instance, to connect to a server running on the local machines with the * default MQTT port, specify tcp://localhost:1883. * @param clientId The client identifier passed to the server when the * client connects to it. It is a null-terminated UTF-8 encoded string. * @param persistence_type The type of persistence to be used by the client: *
* ::MQTTCLIENT_PERSISTENCE_NONE: Use in-memory persistence. If the device or * system on which the client is running fails or is switched off, the current * state of any in-flight messages is lost and some messages may not be * delivered even at QoS1 and QoS2. *
* ::MQTTCLIENT_PERSISTENCE_DEFAULT: Use the default (file system-based) * persistence mechanism. Status about in-flight messages is held in persistent * storage and provides some protection against message loss in the case of * unexpected failure. *
* ::MQTTCLIENT_PERSISTENCE_USER: Use an application-specific persistence * implementation. Using this type of persistence gives control of the * persistence mechanism to the application. The application has to implement * the MQTTClient_persistence interface. * @param persistence_context If the application uses * ::MQTTCLIENT_PERSISTENCE_NONE persistence, this argument is unused and should * be set to NULL. For ::MQTTCLIENT_PERSISTENCE_DEFAULT persistence, it * should be set to the location of the persistence directory (if set * to NULL, the persistence directory used is the working directory). * Applications that use ::MQTTCLIENT_PERSISTENCE_USER persistence set this * argument to point to a valid MQTTClient_persistence structure. * @return ::MQTTASYNC_SUCCESS if the client is successfully created, otherwise * an error code is returned. */ LIBMQTT_API int MQTTAsync_create(MQTTAsync* handle, const char* serverURI, const char* clientId, int persistence_type, void* persistence_context); /** Options for the ::MQTTAsync_createWithOptions call */ typedef struct { /** The eyecatcher for this structure. must be MQCO. */ char struct_id[4]; /** The version number of this structure. Must be 0, 1, 2 or 3 * 0 means no MQTTVersion * 1 means no allowDisconnectedSendAtAnyTime, deleteOldestMessages, restoreMessages * 2 means no persistQoS0 */ int struct_version; /** Whether to allow messages to be sent when the client library is not connected. */ int sendWhileDisconnected; /** The maximum number of messages allowed to be buffered. This is intended to be used to * limit the number of messages queued while the client is not connected. It also applies * when the client is connected, however, so has to be greater than 0. */ int maxBufferedMessages; /** Whether the MQTT version is 3.1, 3.1.1, or 5. To use V5, this must be set. * MQTT V5 has to be chosen here, because during the create call the message persistence * is initialized, and we want to know whether the format of any persisted messages * is appropriate for the MQTT version we are going to connect with. Selecting 3.1 or * 3.1.1 and attempting to read 5.0 persisted messages will result in an error on create. */ int MQTTVersion; /** * Allow sending of messages while disconnected before a first successful connect. */ int allowDisconnectedSendAtAnyTime; /* * When the maximum number of buffered messages is reached, delete the oldest rather than the newest. */ int deleteOldestMessages; /* * Restore messages from persistence on create - or clear it. */ int restoreMessages; /* * Persist QoS0 publish commands - an option to not persist them. */ int persistQoS0; } MQTTAsync_createOptions; #define MQTTAsync_createOptions_initializer { {'M', 'Q', 'C', 'O'}, 2, 0, 100, MQTTVERSION_DEFAULT, 0, 0, 1, 1} #define MQTTAsync_createOptions_initializer5 { {'M', 'Q', 'C', 'O'}, 2, 0, 100, MQTTVERSION_5, 0, 0, 1, 1} LIBMQTT_API int MQTTAsync_createWithOptions(MQTTAsync* handle, const char* serverURI, const char* clientId, int persistence_type, void* persistence_context, MQTTAsync_createOptions* options); /** * MQTTAsync_willOptions defines the MQTT "Last Will and Testament" (LWT) settings for * the client. In the event that a client unexpectedly loses its connection to * the server, the server publishes the LWT message to the LWT topic on * behalf of the client. This allows other clients (subscribed to the LWT topic) * to be made aware that the client has disconnected. To enable the LWT * function for a specific client, a valid pointer to an MQTTAsync_willOptions * structure is passed in the MQTTAsync_connectOptions structure used in the * MQTTAsync_connect() call that connects the client to the server. The pointer * to MQTTAsync_willOptions can be set to NULL if the LWT function is not * required. */ typedef struct { /** The eyecatcher for this structure. must be MQTW. */ char struct_id[4]; /** The version number of this structure. Must be 0 or 1 0 indicates no binary will message support */ int struct_version; /** The LWT topic to which the LWT message will be published. */ const char* topicName; /** The LWT payload. */ const char* message; /** * The retained flag for the LWT message (see MQTTAsync_message.retained). */ int retained; /** * The quality of service setting for the LWT message (see * MQTTAsync_message.qos and @ref qos). */ int qos; /** The LWT payload in binary form. This is only checked and used if the message option is NULL */ struct { int len; /**< binary payload length */ const void* data; /**< binary payload data */ } payload; } MQTTAsync_willOptions; #define MQTTAsync_willOptions_initializer { {'M', 'Q', 'T', 'W'}, 1, NULL, NULL, 0, 0, { 0, NULL } } #define MQTT_SSL_VERSION_DEFAULT 0 #define MQTT_SSL_VERSION_TLS_1_0 1 #define MQTT_SSL_VERSION_TLS_1_1 2 #define MQTT_SSL_VERSION_TLS_1_2 3 /** * MQTTAsync_sslProperties defines the settings to establish an SSL/TLS connection using the * OpenSSL library. It covers the following scenarios: * - Server authentication: The client needs the digital certificate of the server. It is included * in a store containting trusted material (also known as "trust store"). * - Mutual authentication: Both client and server are authenticated during the SSL handshake. In * addition to the digital certificate of the server in a trust store, the client will need its own * digital certificate and the private key used to sign its digital certificate stored in a "key store". * - Anonymous connection: Both client and server do not get authenticated and no credentials are needed * to establish an SSL connection. Note that this scenario is not fully secure since it is subject to * man-in-the-middle attacks. */ typedef struct { /** The eyecatcher for this structure. Must be MQTS */ char struct_id[4]; /** The version number of this structure. Must be 0, 1, 2, 3, 4 or 5. * 0 means no sslVersion * 1 means no verify, CApath * 2 means no ssl_error_context, ssl_error_cb * 3 means no ssl_psk_cb, ssl_psk_context, disableDefaultTrustStore * 4 means no protos, protos_len */ int struct_version; /** The file in PEM format containing the public digital certificates trusted by the client. */ const char* trustStore; /** The file in PEM format containing the public certificate chain of the client. It may also include * the client's private key. */ const char* keyStore; /** If not included in the sslKeyStore, this setting points to the file in PEM format containing * the client's private key. */ const char* privateKey; /** The password to load the client's privateKey if encrypted. */ const char* privateKeyPassword; /** * The list of cipher suites that the client will present to the server during the SSL handshake. For a * full explanation of the cipher list format, please see the OpenSSL on-line documentation: * http://www.openssl.org/docs/apps/ciphers.html#CIPHER_LIST_FORMAT * If this setting is ommitted, its default value will be "ALL", that is, all the cipher suites -excluding * those offering no encryption- will be considered. * This setting can be used to set an SSL anonymous connection ("aNULL" string value, for instance). */ const char* enabledCipherSuites; /** True/False option to enable verification of the server certificate **/ int enableServerCertAuth; /** The SSL/TLS version to use. Specify one of MQTT_SSL_VERSION_DEFAULT (0), * MQTT_SSL_VERSION_TLS_1_0 (1), MQTT_SSL_VERSION_TLS_1_1 (2) or MQTT_SSL_VERSION_TLS_1_2 (3). * Only used if struct_version is >= 1. */ int sslVersion; /** * Whether to carry out post-connect checks, including that a certificate * matches the given host name. * Exists only if struct_version >= 2 */ int verify; /** * From the OpenSSL documentation: * If CApath is not NULL, it points to a directory containing CA certificates in PEM format. * Exists only if struct_version >= 2 */ const char* CApath; /** * Callback function for OpenSSL error handler ERR_print_errors_cb * Exists only if struct_version >= 3 */ int (*ssl_error_cb) (const char *str, size_t len, void *u); /** * Application-specific contex for OpenSSL error handler ERR_print_errors_cb * Exists only if struct_version >= 3 */ void* ssl_error_context; /** * Callback function for setting TLS-PSK options. Parameters correspond to that of * SSL_CTX_set_psk_client_callback, except for u which is the pointer ssl_psk_context. * Exists only if struct_version >= 4 */ unsigned int (*ssl_psk_cb) (const char *hint, char *identity, unsigned int max_identity_len, unsigned char *psk, unsigned int max_psk_len, void *u); /** * Application-specific contex for ssl_psk_cb * Exists only if struct_version >= 4 */ void* ssl_psk_context; /** * Don't load default SSL CA. Should be used together with PSK to make sure * regular servers with certificate in place is not accepted. * Exists only if struct_version >= 4 */ int disableDefaultTrustStore; /** * The protocol-lists must be in wire-format, which is defined as a vector of non-empty, 8-bit length-prefixed, byte strings. * The length-prefix byte is not included in the length. Each string is limited to 255 bytes. A byte-string length of 0 is invalid. * A truncated byte-string is invalid. * Check documentation for SSL_CTX_set_alpn_protos * Exists only if struct_version >= 5 */ const unsigned char *protos; /** * The length of the vector protos vector * Exists only if struct_version >= 5 */ unsigned int protos_len; } MQTTAsync_SSLOptions; #define MQTTAsync_SSLOptions_initializer { {'M', 'Q', 'T', 'S'}, 5, NULL, NULL, NULL, NULL, NULL, 1, MQTT_SSL_VERSION_DEFAULT, 0, NULL, NULL, NULL, NULL, NULL, 0, NULL, 0 } /** Utility structure where name/value pairs are needed */ typedef struct { const char* name; /**< name string */ const char* value; /**< value string */ } MQTTAsync_nameValue; /** * MQTTAsync_connectOptions defines several settings that control the way the * client connects to an MQTT server. * * Suitable default values are set in the following initializers: * - MQTTAsync_connectOptions_initializer: for MQTT 3.1.1 non-WebSockets * - MQTTAsync_connectOptions_initializer5: for MQTT 5.0 non-WebSockets * - MQTTAsync_connectOptions_initializer_ws: for MQTT 3.1.1 WebSockets * - MQTTAsync_connectOptions_initializer5_ws: for MQTT 5.0 WebSockets */ typedef struct { /** The eyecatcher for this structure. must be MQTC. */ char struct_id[4]; /** The version number of this structure. Must be 0, 1, 2, 3 4 5 6, 7 or 8. * 0 signifies no SSL options and no serverURIs * 1 signifies no serverURIs * 2 signifies no MQTTVersion * 3 signifies no automatic reconnect options * 4 signifies no binary password option (just string) * 5 signifies no MQTTV5 properties * 6 signifies no HTTP headers option * 7 signifies no HTTP proxy and HTTPS proxy options */ int struct_version; /** The "keep alive" interval, measured in seconds, defines the maximum time * that should pass without communication between the client and the server * The client will ensure that at least one message travels across the * network within each keep alive period. In the absence of a data-related * message during the time period, the client sends a very small MQTT * "ping" message, which the server will acknowledge. The keep alive * interval enables the client to detect when the server is no longer * available without having to wait for the long TCP/IP timeout. * Set to 0 if you do not want any keep alive processing. */ int keepAliveInterval; /** * This is a boolean value. The cleansession setting controls the behaviour * of both the client and the server at connection and disconnection time. * The client and server both maintain session state information. This * information is used to ensure "at least once" and "exactly once" * delivery, and "exactly once" receipt of messages. Session state also * includes subscriptions created by an MQTT client. You can choose to * maintain or discard state information between sessions. * * When cleansession is true, the state information is discarded at * connect and disconnect. Setting cleansession to false keeps the state * information. When you connect an MQTT client application with * MQTTAsync_connect(), the client identifies the connection using the * client identifier and the address of the server. The server checks * whether session information for this client * has been saved from a previous connection to the server. If a previous * session still exists, and cleansession=true, then the previous session * information at the client and server is cleared. If cleansession=false, * the previous session is resumed. If no previous session exists, a new * session is started. */ int cleansession; /** * This controls how many messages can be in-flight simultaneously. */ int maxInflight; /** * This is a pointer to an MQTTAsync_willOptions structure. If your * application does not make use of the Last Will and Testament feature, * set this pointer to NULL. */ MQTTAsync_willOptions* will; /** * MQTT servers that support the MQTT v3.1 protocol provide authentication * and authorisation by user name and password. This is the user name * parameter. */ const char* username; /** * MQTT servers that support the MQTT v3.1 protocol provide authentication * and authorisation by user name and password. This is the password * parameter. */ const char* password; /** * The time interval in seconds to allow a connect to complete. */ int connectTimeout; /** * The time interval in seconds after which unacknowledged publish requests are * retried during a TCP session. With MQTT 3.1.1 and later, retries are * not required except on reconnect. 0 turns off in-session retries, and is the * recommended setting. Adding retries to an already overloaded network only * exacerbates the problem. */ int retryInterval; /** * This is a pointer to an MQTTAsync_SSLOptions structure. If your * application does not make use of SSL, set this pointer to NULL. */ MQTTAsync_SSLOptions* ssl; /** * A pointer to a callback function to be called if the connect successfully * completes. Can be set to NULL, in which case no indication of successful * completion will be received. */ MQTTAsync_onSuccess* onSuccess; /** * A pointer to a callback function to be called if the connect fails. * Can be set to NULL, in which case no indication of unsuccessful * completion will be received. */ MQTTAsync_onFailure* onFailure; /** * A pointer to any application-specific context. The * the context pointer is passed to success or failure callback functions to * provide access to the context information in the callback. */ void* context; /** * The number of entries in the serverURIs array. */ int serverURIcount; /** * An array of null-terminated strings specifying the servers to * which the client will connect. Each string takes the form protocol://host:port. * protocol must be tcp, ssl, ws or wss. * The TLS enabled prefixes (ssl, wss) are only valid if a TLS version of the library * is linked with. * For host, you can * specify either an IP address or a domain name. For instance, to connect to * a server running on the local machines with the default MQTT port, specify * tcp://localhost:1883. */ char* const* serverURIs; /** * Sets the version of MQTT to be used on the connect. * MQTTVERSION_DEFAULT (0) = default: start with 3.1.1, and if that fails, fall back to 3.1 * MQTTVERSION_3_1 (3) = only try version 3.1 * MQTTVERSION_3_1_1 (4) = only try version 3.1.1 */ int MQTTVersion; /** * Reconnect automatically in the case of a connection being lost. 0=false, 1=true */ int automaticReconnect; /** * The minimum automatic reconnect retry interval in seconds. Doubled on each failed retry. */ int minRetryInterval; /** * The maximum automatic reconnect retry interval in seconds. The doubling stops here on failed retries. */ int maxRetryInterval; /** * Optional binary password. Only checked and used if the password option is NULL */ struct { int len; /**< binary password length */ const void* data; /**< binary password data */ } binarypwd; /* * MQTT V5 clean start flag. Only clears state at the beginning of the session. */ int cleanstart; /** * MQTT V5 properties for connect */ MQTTProperties *connectProperties; /** * MQTT V5 properties for the will message in the connect */ MQTTProperties *willProperties; /** * A pointer to a callback function to be called if the connect successfully * completes. Can be set to NULL, in which case no indication of successful * completion will be received. */ MQTTAsync_onSuccess5* onSuccess5; /** * A pointer to a callback function to be called if the connect fails. * Can be set to NULL, in which case no indication of unsuccessful * completion will be received. */ MQTTAsync_onFailure5* onFailure5; /** * HTTP headers for websockets */ const MQTTAsync_nameValue* httpHeaders; /** * HTTP proxy */ const char* httpProxy; /** * HTTPS proxy */ const char* httpsProxy; } MQTTAsync_connectOptions; /** Initializer for connect options for MQTT 3.1.1 non-WebSocket connections */ #define MQTTAsync_connectOptions_initializer { {'M', 'Q', 'T', 'C'}, 8, 60, 1, 65535, NULL, NULL, NULL, 30, 0,\ NULL, NULL, NULL, NULL, 0, NULL, MQTTVERSION_DEFAULT, 0, 1, 60, {0, NULL}, 0, NULL, NULL, NULL, NULL, NULL, NULL, NULL} /** Initializer for connect options for MQTT 5.0 non-WebSocket connections */ #define MQTTAsync_connectOptions_initializer5 { {'M', 'Q', 'T', 'C'}, 8, 60, 0, 65535, NULL, NULL, NULL, 30, 0,\ NULL, NULL, NULL, NULL, 0, NULL, MQTTVERSION_5, 0, 1, 60, {0, NULL}, 1, NULL, NULL, NULL, NULL, NULL, NULL, NULL} /** Initializer for connect options for MQTT 3.1.1 WebSockets connections. * The keepalive interval is set to 45 seconds to avoid webserver 60 second inactivity timeouts. */ #define MQTTAsync_connectOptions_initializer_ws { {'M', 'Q', 'T', 'C'}, 8, 45, 1, 65535, NULL, NULL, NULL, 30, 0,\ NULL, NULL, NULL, NULL, 0, NULL, MQTTVERSION_DEFAULT, 0, 1, 60, {0, NULL}, 0, NULL, NULL, NULL, NULL, NULL, NULL, NULL} /** Initializer for connect options for MQTT 5.0 WebSockets connections. * The keepalive interval is set to 45 seconds to avoid webserver 60 second inactivity timeouts. */ #define MQTTAsync_connectOptions_initializer5_ws { {'M', 'Q', 'T', 'C'}, 8, 45, 0, 65535, NULL, NULL, NULL, 30, 0,\ NULL, NULL, NULL, NULL, 0, NULL, MQTTVERSION_5, 0, 1, 60, {0, NULL}, 1, NULL, NULL, NULL, NULL, NULL, NULL, NULL} /** * This function attempts to connect a previously-created client (see * MQTTAsync_create()) to an MQTT server using the specified options. If you * want to enable asynchronous message and status notifications, you must call * MQTTAsync_setCallbacks() prior to MQTTAsync_connect(). * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param options A pointer to a valid MQTTAsync_connectOptions * structure. * @return ::MQTTASYNC_SUCCESS if the client connect request was accepted. * If the client was unable to connect to the server, an error code is * returned via the onFailure callback, if set. * Error codes greater than 0 are returned by the MQTT protocol:

* 1: Connection refused: Unacceptable protocol version
* 2: Connection refused: Identifier rejected
* 3: Connection refused: Server unavailable
* 4: Connection refused: Bad user name or password
* 5: Connection refused: Not authorized
* 6-255: Reserved for future use
*/ LIBMQTT_API int MQTTAsync_connect(MQTTAsync handle, const MQTTAsync_connectOptions* options); /** Options for the ::MQTTAsync_disconnect call */ typedef struct { /** The eyecatcher for this structure. Must be MQTD. */ char struct_id[4]; /** The version number of this structure. Must be 0 or 1. 0 signifies no V5 properties */ int struct_version; /** * The client delays disconnection for up to this time (in * milliseconds) in order to allow in-flight message transfers to complete. */ int timeout; /** * A pointer to a callback function to be called if the disconnect successfully * completes. Can be set to NULL, in which case no indication of successful * completion will be received. */ MQTTAsync_onSuccess* onSuccess; /** * A pointer to a callback function to be called if the disconnect fails. * Can be set to NULL, in which case no indication of unsuccessful * completion will be received. */ MQTTAsync_onFailure* onFailure; /** * A pointer to any application-specific context. The * the context pointer is passed to success or failure callback functions to * provide access to the context information in the callback. */ void* context; /** * MQTT V5 input properties */ MQTTProperties properties; /** * Reason code for MQTTV5 disconnect */ enum MQTTReasonCodes reasonCode; /** * A pointer to a callback function to be called if the disconnect successfully * completes. Can be set to NULL, in which case no indication of successful * completion will be received. */ MQTTAsync_onSuccess5* onSuccess5; /** * A pointer to a callback function to be called if the disconnect fails. * Can be set to NULL, in which case no indication of unsuccessful * completion will be received. */ MQTTAsync_onFailure5* onFailure5; } MQTTAsync_disconnectOptions; #define MQTTAsync_disconnectOptions_initializer { {'M', 'Q', 'T', 'D'}, 0, 0, NULL, NULL, NULL,\ MQTTProperties_initializer, MQTTREASONCODE_SUCCESS, NULL, NULL } #define MQTTAsync_disconnectOptions_initializer5 { {'M', 'Q', 'T', 'D'}, 1, 0, NULL, NULL, NULL,\ MQTTProperties_initializer, MQTTREASONCODE_SUCCESS, NULL, NULL } /** * This function attempts to disconnect the client from the MQTT * server. In order to allow the client time to complete handling of messages * that are in-flight when this function is called, a timeout period is * specified. When the timeout period has expired, the client disconnects even * if there are still outstanding message acknowledgements. * The next time the client connects to the same server, any QoS 1 or 2 * messages which have not completed will be retried depending on the * cleansession settings for both the previous and the new connection (see * MQTTAsync_connectOptions.cleansession and MQTTAsync_connect()). * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param options The client delays disconnection for up to this time (in * milliseconds) in order to allow in-flight message transfers to complete. * @return ::MQTTASYNC_SUCCESS if the client successfully disconnects from * the server. An error code is returned if the client was unable to disconnect * from the server */ LIBMQTT_API int MQTTAsync_disconnect(MQTTAsync handle, const MQTTAsync_disconnectOptions* options); /** * This function allows the client application to test whether or not a * client is currently connected to the MQTT server. * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @return Boolean true if the client is connected, otherwise false. */ LIBMQTT_API int MQTTAsync_isConnected(MQTTAsync handle); /** * This function attempts to subscribe a client to a single topic, which may * contain wildcards (see @ref wildcard). This call also specifies the * @ref qos requested for the subscription * (see also MQTTAsync_subscribeMany()). * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param topic The subscription topic, which may include wildcards. * @param qos The requested quality of service for the subscription. * @param response A pointer to a response options structure. Used to set callback functions. * @return ::MQTTASYNC_SUCCESS if the subscription request is successful. * An error code is returned if there was a problem registering the * subscription. */ LIBMQTT_API int MQTTAsync_subscribe(MQTTAsync handle, const char* topic, int qos, MQTTAsync_responseOptions* response); /** * This function attempts to subscribe a client to a list of topics, which may * contain wildcards (see @ref wildcard). This call also specifies the * @ref qos requested for each topic (see also MQTTAsync_subscribe()). * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param count The number of topics for which the client is requesting * subscriptions. * @param topic An array (of length count) of pointers to * topics, each of which may include wildcards. * @param qos An array (of length count) of @ref qos * values. qos[n] is the requested QoS for topic[n]. * @param response A pointer to a response options structure. Used to set callback functions. * @return ::MQTTASYNC_SUCCESS if the subscription request is successful. * An error code is returned if there was a problem registering the * subscriptions. */ LIBMQTT_API int MQTTAsync_subscribeMany(MQTTAsync handle, int count, char* const* topic, const int* qos, MQTTAsync_responseOptions* response); /** * This function attempts to remove an existing subscription made by the * specified client. * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param topic The topic for the subscription to be removed, which may * include wildcards (see @ref wildcard). * @param response A pointer to a response options structure. Used to set callback functions. * @return ::MQTTASYNC_SUCCESS if the subscription is removed. * An error code is returned if there was a problem removing the * subscription. */ LIBMQTT_API int MQTTAsync_unsubscribe(MQTTAsync handle, const char* topic, MQTTAsync_responseOptions* response); /** * This function attempts to remove existing subscriptions to a list of topics * made by the specified client. * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param count The number subscriptions to be removed. * @param topic An array (of length count) of pointers to the topics of * the subscriptions to be removed, each of which may include wildcards. * @param response A pointer to a response options structure. Used to set callback functions. * @return ::MQTTASYNC_SUCCESS if the subscriptions are removed. * An error code is returned if there was a problem removing the subscriptions. */ LIBMQTT_API int MQTTAsync_unsubscribeMany(MQTTAsync handle, int count, char* const* topic, MQTTAsync_responseOptions* response); /** * This function attempts to publish a message to a given topic (see also * ::MQTTAsync_sendMessage()). An ::MQTTAsync_token is issued when * this function returns successfully if the QoS is greater than 0. * If the client application needs to * test for successful delivery of messages, a callback should be set * (see ::MQTTAsync_onSuccess() and ::MQTTAsync_deliveryComplete()). * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param destinationName The topic associated with this message. * @param payloadlen The length of the payload in bytes. * @param payload A pointer to the byte array payload of the message. * @param qos The @ref qos of the message. * @param retained The retained flag for the message. * @param response A pointer to an ::MQTTAsync_responseOptions structure. Used to set callback functions. * This is optional and can be set to NULL. * @return ::MQTTASYNC_SUCCESS if the message is accepted for publication. * An error code is returned if there was a problem accepting the message. */ LIBMQTT_API int MQTTAsync_send(MQTTAsync handle, const char* destinationName, int payloadlen, const void* payload, int qos, int retained, MQTTAsync_responseOptions* response); /** * This function attempts to publish a message to a given topic (see also * MQTTAsync_publish()). An ::MQTTAsync_token is issued when * this function returns successfully if the QoS is greater than 0. * If the client application needs to * test for successful delivery of messages, a callback should be set * (see ::MQTTAsync_onSuccess() and ::MQTTAsync_deliveryComplete()). * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param destinationName The topic associated with this message. * @param msg A pointer to a valid MQTTAsync_message structure containing * the payload and attributes of the message to be published. * @param response A pointer to an ::MQTTAsync_responseOptions structure. Used to set callback functions. * @return ::MQTTASYNC_SUCCESS if the message is accepted for publication. * An error code is returned if there was a problem accepting the message. */ LIBMQTT_API int MQTTAsync_sendMessage(MQTTAsync handle, const char* destinationName, const MQTTAsync_message* msg, MQTTAsync_responseOptions* response); /** * This function sets a pointer to an array of tokens for * messages that are currently in-flight (pending completion). * * Important note: The memory used to hold the array of tokens is * malloc()'d in this function. The client application is responsible for * freeing this memory when it is no longer required. * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param tokens The address of a pointer to an ::MQTTAsync_token. * When the function returns successfully, the pointer is set to point to an * array of tokens representing messages pending completion. The last member of * the array is set to -1 to indicate there are no more tokens. If no tokens * are pending, the pointer is set to NULL. * @return ::MQTTASYNC_SUCCESS if the function returns successfully. * An error code is returned if there was a problem obtaining the list of * pending tokens. */ LIBMQTT_API int MQTTAsync_getPendingTokens(MQTTAsync handle, MQTTAsync_token **tokens); /** * Tests whether a request corresponding to a token is complete. * * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param token An ::MQTTAsync_token associated with a request. * @return 1 if the request has been completed, 0 if not. */ #define MQTTASYNC_TRUE 1 LIBMQTT_API int MQTTAsync_isComplete(MQTTAsync handle, MQTTAsync_token token); /** * Waits for a request corresponding to a token to complete. This only works for * messages with QoS greater than 0. A QoS 0 message has no MQTT token. * This function will always return ::MQTTASYNC_SUCCESS for a QoS 0 message. * * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param token An ::MQTTAsync_token associated with a request. * @param timeout the maximum time to wait for completion, in milliseconds * @return ::MQTTASYNC_SUCCESS if the request has been completed in the time allocated, * ::MQTTASYNC_FAILURE or ::MQTTASYNC_DISCONNECTED if not. */ LIBMQTT_API int MQTTAsync_waitForCompletion(MQTTAsync handle, MQTTAsync_token token, unsigned long timeout); /** * This function frees memory allocated to an MQTT message, including the * additional memory allocated to the message payload. The client application * calls this function when the message has been fully processed. Important * note: This function does not free the memory allocated to a message * topic string. It is the responsibility of the client application to free * this memory using the MQTTAsync_free() library function. * @param msg The address of a pointer to the ::MQTTAsync_message structure * to be freed. */ LIBMQTT_API void MQTTAsync_freeMessage(MQTTAsync_message** msg); /** * This function frees memory allocated by the MQTT C client library, especially the * topic name. This is needed on Windows when the client library and application * program have been compiled with different versions of the C compiler. It is * thus good policy to always use this function when freeing any MQTT C client- * allocated memory. * @param ptr The pointer to the client library storage to be freed. */ LIBMQTT_API void MQTTAsync_free(void* ptr); /** * This function is used to allocate memory to be used or freed by the MQTT C client library, * especially the data in the ::MQTTPersistence_afterRead and ::MQTTPersistence_beforeWrite * callbacks. This is needed on Windows when the client library and application * program have been compiled with different versions of the C compiler. * @param size The size of the memory to be allocated. */ LIBMQTT_API void* MQTTAsync_malloc(size_t size); /** * This function frees the memory allocated to an MQTT client (see * MQTTAsync_create()). It should be called when the client is no longer * required. * @param handle A pointer to the handle referring to the ::MQTTAsync * structure to be freed. */ LIBMQTT_API void MQTTAsync_destroy(MQTTAsync* handle); enum MQTTASYNC_TRACE_LEVELS { MQTTASYNC_TRACE_MAXIMUM = 1, MQTTASYNC_TRACE_MEDIUM, MQTTASYNC_TRACE_MINIMUM, MQTTASYNC_TRACE_PROTOCOL, MQTTASYNC_TRACE_ERROR, MQTTASYNC_TRACE_SEVERE, MQTTASYNC_TRACE_FATAL, }; /** * This function sets the level of trace information which will be * returned in the trace callback. * @param level the trace level required */ LIBMQTT_API void MQTTAsync_setTraceLevel(enum MQTTASYNC_TRACE_LEVELS level); /** * This is a callback function prototype which must be implemented if you want * to receive trace information. Do not invoke any other Paho API calls in this * callback function - unpredictable behavior may result. * @param level the trace level of the message returned * @param message the trace message. This is a pointer to a static buffer which * will be overwritten on each call. You must copy the data if you want to keep * it for later. */ typedef void MQTTAsync_traceCallback(enum MQTTASYNC_TRACE_LEVELS level, char* message); /** * This function sets the trace callback if needed. If set to NULL, * no trace information will be returned. The default trace level is * MQTTASYNC_TRACE_MINIMUM. * @param callback a pointer to the function which will handle the trace information */ LIBMQTT_API void MQTTAsync_setTraceCallback(MQTTAsync_traceCallback* callback); /** * This function returns version information about the library. * no trace information will be returned. The default trace level is * MQTTASYNC_TRACE_MINIMUM * @return an array of strings describing the library. The last entry is a NULL pointer. */ LIBMQTT_API MQTTAsync_nameValue* MQTTAsync_getVersionInfo(void); /** * Returns a pointer to a string representation of the error code, or NULL. * Do not free after use. Returns NULL if the error code is unknown. * @param code the MQTTASYNC_ return code. * @return a static string representation of the error code. */ LIBMQTT_API const char* MQTTAsync_strerror(int code); /*! * @cond MQTTAsync_main * @page async Threading * The client application runs on several threads. * Processing of handshaking and maintaining * the network connection is performed in the background. * This API is thread safe: functions may be called by multiple application * threads. * Notifications of status and message reception are provided to the client * application using callbacks registered with the library by the call to * MQTTAsync_setCallbacks() (see MQTTAsync_messageArrived(), * MQTTAsync_connectionLost() and MQTTAsync_deliveryComplete()). * In addition, some functions allow success and failure callbacks to be set * for individual requests, in the ::MQTTAsync_responseOptions structure. Applications * can be written as a chain of callback functions. * * @page callbacks Callbacks * Any function from this API may be used within a callback. It is not advisable to * use ::MQTTAsync_waitForCompletion within a callback, however, as it is the only * API call that may take some time to complete, which may cause unpredictable * behaviour. All the other API calls are intended to complete quickly, starting * a request in the background, with success or failure notified by other callbacks. * * If no callbacks are assigned, this will include the message arrived callback. * This could be done if the application is a pure publisher, and does * not subscribe to any topics. If however messages are received, and no message * arrived callback is set, then those messages will accumulate * and take up memory, as there is no place for them to be delivered. * A log message will be written to highlight the issue, but it is up * to the application to protect against this situation. * * @page auto_reconnect Automatic Reconnect * The ability for the client library to reconnect automatically in the event * of a connection failure was added in 1.1. The connection lost callback * allows a flexible response to the loss of a connection, so almost any * behaviour can be implemented in that way. Automatic reconnect does have the * advantage of being a little simpler to use. * * To switch on automatic reconnect, the connect options field * automaticReconnect should be set to non-zero. The minimum and maximum times * before the next connection attempt can also be set, the defaults being 1 and * 60 seconds. At each failure to reconnect, the retry interval is doubled until * the maximum value is reached, and there it stays until the connection is * successfully re-established whereupon it is reset. * * When a reconnection attempt is successful, the ::MQTTAsync_connected callback * function is invoked, if set by calling ::MQTTAsync_setConnected. This allows * the application to take any actions needed, such as amending subscriptions. * * @page offline_publish Publish While Disconnected * This feature was not originally available because with persistence enabled, * messages could be stored locally without ever knowing if they could be sent. * The client application could have created the client with an erroneous broker * address or port for instance. * * To enable messages to be published when the application is disconnected * ::MQTTAsync_createWithOptions must be used instead of ::MQTTAsync_create to * create the client object. The ::MQTTAsync_createOptions field sendWhileDisconnected * must be set to non-zero, and the maxBufferedMessages field set as required - * the default being 100. * * ::MQTTAsync_getPendingTokens can be called to return the ids of the messages * waiting to be sent, or for which the sending process has not completed. * * @page wildcard Subscription wildcards * Every MQTT message includes a topic that classifies it. MQTT servers use * topics to determine which subscribers should receive messages published to * the server. * * Consider the server receiving messages from several environmental sensors. * Each sensor publishes its measurement data as a message with an associated * topic. Subscribing applications need to know which sensor originally * published each received message. A unique topic is thus used to identify * each sensor and measurement type. Topics such as SENSOR1TEMP, * SENSOR1HUMIDITY, SENSOR2TEMP and so on achieve this but are not very * flexible. If additional sensors are added to the system at a later date, * subscribing applications must be modified to receive them. * * To provide more flexibility, MQTT supports a hierarchical topic namespace. * This allows application designers to organize topics to simplify their * management. Levels in the hierarchy are delimited by the '/' character, * such as SENSOR/1/HUMIDITY. Publishers and subscribers use these * hierarchical topics as already described. * * For subscriptions, two wildcard characters are supported: *

A '#' character represents a complete sub-tree of the hierarchy and * thus must be the last character in a subscription topic string, such as * SENSOR/#. This will match any topic starting with SENSOR/, such as * SENSOR/1/TEMP and SENSOR/2/HUMIDITY.
A '+' character represents a single level of the hierarchy and is * used between delimiters. For example, SENSOR/+/TEMP will match * SENSOR/1/TEMP and SENSOR/2/TEMP.

* Publishers are not allowed to use the wildcard characters in their topic * names. * * Deciding on your topic hierarchy is an important step in your system design. * * @page qos Quality of service * The MQTT protocol provides three qualities of service for delivering * messages between clients and servers: "at most once", "at least once" and * "exactly once". * * Quality of service (QoS) is an attribute of an individual message being * published. An application sets the QoS for a specific message by setting the * MQTTAsync_message.qos field to the required value. * * A subscribing client can set the maximum quality of service a server uses * to send messages that match the client subscriptions. The * MQTTAsync_subscribe() and MQTTAsync_subscribeMany() functions set this * maximum. The QoS of a message forwarded to a subscriber thus might be * different to the QoS given to the message by the original publisher. * The lower of the two values is used to forward a message. * * The three levels are: * * QoS0, At most once: The message is delivered at most once, or it * may not be delivered at all. Its delivery across the network is not * acknowledged. The message is not stored. The message could be lost if the * client is disconnected, or if the server fails. QoS0 is the fastest mode of * transfer. It is sometimes called "fire and forget". * * The MQTT protocol does not require servers to forward publications at QoS0 * to a client. If the client is disconnected at the time the server receives * the publication, the publication might be discarded, depending on the * server implementation. * * QoS1, At least once: The message is always delivered at least once. * It might be delivered multiple times if there is a failure before an * acknowledgment is received by the sender. The message must be stored * locally at the sender, until the sender receives confirmation that the * message has been published by the receiver. The message is stored in case * the message must be sent again. * * QoS2, Exactly once: The message is always delivered exactly once. * The message must be stored locally at the sender, until the sender receives * confirmation that the message has been published by the receiver. The * message is stored in case the message must be sent again. QoS2 is the * safest, but slowest mode of transfer. A more sophisticated handshaking * and acknowledgement sequence is used than for QoS1 to ensure no duplication * of messages occurs. * @page publish Publication example @code #include #include #include #include "MQTTAsync.h" #if !defined(_WIN32) #include #else #include #endif #if defined(_WRS_KERNEL) #include #endif #define ADDRESS "tcp://mqtt.eclipseprojects.io:1883" #define CLIENTID "ExampleClientPub" #define TOPIC "MQTT Examples" #define PAYLOAD "Hello World!" #define QOS 1 #define TIMEOUT 10000L int finished = 0; void connlost(void *context, char *cause) { MQTTAsync client = (MQTTAsync)context; MQTTAsync_connectOptions conn_opts = MQTTAsync_connectOptions_initializer; int rc; printf("\nConnection lost\n"); printf(" cause: %s\n", cause); printf("Reconnecting\n"); conn_opts.keepAliveInterval = 20; conn_opts.cleansession = 1; if ((rc = MQTTAsync_connect(client, &conn_opts)) != MQTTASYNC_SUCCESS) { printf("Failed to start connect, return code %d\n", rc); finished = 1; } } void onDisconnectFailure(void* context, MQTTAsync_failureData* response) { printf("Disconnect failed\n"); finished = 1; } void onDisconnect(void* context, MQTTAsync_successData* response) { printf("Successful disconnection\n"); finished = 1; } void onSendFailure(void* context, MQTTAsync_failureData* response) { MQTTAsync client = (MQTTAsync)context; MQTTAsync_disconnectOptions opts = MQTTAsync_disconnectOptions_initializer; int rc; printf("Message send failed token %d error code %d\n", response->token, response->code); opts.onSuccess = onDisconnect; opts.onFailure = onDisconnectFailure; opts.context = client; if ((rc = MQTTAsync_disconnect(client, &opts)) != MQTTASYNC_SUCCESS) { printf("Failed to start disconnect, return code %d\n", rc); exit(EXIT_FAILURE); } } void onSend(void* context, MQTTAsync_successData* response) { MQTTAsync client = (MQTTAsync)context; MQTTAsync_disconnectOptions opts = MQTTAsync_disconnectOptions_initializer; int rc; printf("Message with token value %d delivery confirmed\n", response->token); opts.onSuccess = onDisconnect; opts.onFailure = onDisconnectFailure; opts.context = client; if ((rc = MQTTAsync_disconnect(client, &opts)) != MQTTASYNC_SUCCESS) { printf("Failed to start disconnect, return code %d\n", rc); exit(EXIT_FAILURE); } } void onConnectFailure(void* context, MQTTAsync_failureData* response) { printf("Connect failed, rc %d\n", response ? response->code : 0); finished = 1; } void onConnect(void* context, MQTTAsync_successData* response) { MQTTAsync client = (MQTTAsync)context; MQTTAsync_responseOptions opts = MQTTAsync_responseOptions_initializer; MQTTAsync_message pubmsg = MQTTAsync_message_initializer; int rc; printf("Successful connection\n"); opts.onSuccess = onSend; opts.onFailure = onSendFailure; opts.context = client; pubmsg.payload = PAYLOAD; pubmsg.payloadlen = (int)strlen(PAYLOAD); pubmsg.qos = QOS; pubmsg.retained = 0; if ((rc = MQTTAsync_sendMessage(client, TOPIC, &pubmsg, &opts)) != MQTTASYNC_SUCCESS) { printf("Failed to start sendMessage, return code %d\n", rc); exit(EXIT_FAILURE); } } int messageArrived(void* context, char* topicName, int topicLen, MQTTAsync_message* m) { // not expecting any messages return 1; } int main(int argc, char* argv[]) { MQTTAsync client; MQTTAsync_connectOptions conn_opts = MQTTAsync_connectOptions_initializer; int rc; if ((rc = MQTTAsync_create(&client, ADDRESS, CLIENTID, MQTTCLIENT_PERSISTENCE_NONE, NULL)) != MQTTASYNC_SUCCESS) { printf("Failed to create client object, return code %d\n", rc); exit(EXIT_FAILURE); } if ((rc = MQTTAsync_setCallbacks(client, NULL, connlost, messageArrived, NULL)) != MQTTASYNC_SUCCESS) { printf("Failed to set callback, return code %d\n", rc); exit(EXIT_FAILURE); } conn_opts.keepAliveInterval = 20; conn_opts.cleansession = 1; conn_opts.onSuccess = onConnect; conn_opts.onFailure = onConnectFailure; conn_opts.context = client; if ((rc = MQTTAsync_connect(client, &conn_opts)) != MQTTASYNC_SUCCESS) { printf("Failed to start connect, return code %d\n", rc); exit(EXIT_FAILURE); } printf("Waiting for publication of %s\n" "on topic %s for client with ClientID: %s\n", PAYLOAD, TOPIC, CLIENTID); while (!finished) #if defined(_WIN32) Sleep(100); #else usleep(10000L); #endif MQTTAsync_destroy(&client); return rc; } * @endcode * @page subscribe Subscription example @code #include #include #include #include "MQTTAsync.h" #if !defined(_WIN32) #include #else #include #endif #if defined(_WRS_KERNEL) #include #endif #define ADDRESS "tcp://mqtt.eclipseprojects.io:1883" #define CLIENTID "ExampleClientSub" #define TOPIC "MQTT Examples" #define PAYLOAD "Hello World!" #define QOS 1 #define TIMEOUT 10000L int disc_finished = 0; int subscribed = 0; int finished = 0; void connlost(void *context, char *cause) { MQTTAsync client = (MQTTAsync)context; MQTTAsync_connectOptions conn_opts = MQTTAsync_connectOptions_initializer; int rc; printf("\nConnection lost\n"); if (cause) printf(" cause: %s\n", cause); printf("Reconnecting\n"); conn_opts.keepAliveInterval = 20; conn_opts.cleansession = 1; if ((rc = MQTTAsync_connect(client, &conn_opts)) != MQTTASYNC_SUCCESS) { printf("Failed to start connect, return code %d\n", rc); finished = 1; } } int msgarrvd(void *context, char *topicName, int topicLen, MQTTAsync_message *message) { printf("Message arrived\n"); printf(" topic: %s\n", topicName); printf(" message: %.*s\n", message->payloadlen, (char*)message->payload); MQTTAsync_freeMessage(&message); MQTTAsync_free(topicName); return 1; } void onDisconnectFailure(void* context, MQTTAsync_failureData* response) { printf("Disconnect failed, rc %d\n", response->code); disc_finished = 1; } void onDisconnect(void* context, MQTTAsync_successData* response) { printf("Successful disconnection\n"); disc_finished = 1; } void onSubscribe(void* context, MQTTAsync_successData* response) { printf("Subscribe succeeded\n"); subscribed = 1; } void onSubscribeFailure(void* context, MQTTAsync_failureData* response) { printf("Subscribe failed, rc %d\n", response->code); finished = 1; } void onConnectFailure(void* context, MQTTAsync_failureData* response) { printf("Connect failed, rc %d\n", response->code); finished = 1; } void onConnect(void* context, MQTTAsync_successData* response) { MQTTAsync client = (MQTTAsync)context; MQTTAsync_responseOptions opts = MQTTAsync_responseOptions_initializer; int rc; printf("Successful connection\n"); printf("Subscribing to topic %s\nfor client %s using QoS%d\n\n" "Press Q to quit\n\n", TOPIC, CLIENTID, QOS); opts.onSuccess = onSubscribe; opts.onFailure = onSubscribeFailure; opts.context = client; if ((rc = MQTTAsync_subscribe(client, TOPIC, QOS, &opts)) != MQTTASYNC_SUCCESS) { printf("Failed to start subscribe, return code %d\n", rc); finished = 1; } } int main(int argc, char* argv[]) { MQTTAsync client; MQTTAsync_connectOptions conn_opts = MQTTAsync_connectOptions_initializer; MQTTAsync_disconnectOptions disc_opts = MQTTAsync_disconnectOptions_initializer; int rc; int ch; if ((rc = MQTTAsync_create(&client, ADDRESS, CLIENTID, MQTTCLIENT_PERSISTENCE_NONE, NULL)) != MQTTASYNC_SUCCESS) { printf("Failed to create client, return code %d\n", rc); rc = EXIT_FAILURE; goto exit; } if ((rc = MQTTAsync_setCallbacks(client, client, connlost, msgarrvd, NULL)) != MQTTASYNC_SUCCESS) { printf("Failed to set callbacks, return code %d\n", rc); rc = EXIT_FAILURE; goto destroy_exit; } conn_opts.keepAliveInterval = 20; conn_opts.cleansession = 1; conn_opts.onSuccess = onConnect; conn_opts.onFailure = onConnectFailure; conn_opts.context = client; if ((rc = MQTTAsync_connect(client, &conn_opts)) != MQTTASYNC_SUCCESS) { printf("Failed to start connect, return code %d\n", rc); rc = EXIT_FAILURE; goto destroy_exit; } while (!subscribed && !finished) #if defined(_WIN32) Sleep(100); #else usleep(10000L); #endif if (finished) goto exit; do { ch = getchar(); } while (ch!='Q' && ch != 'q'); disc_opts.onSuccess = onDisconnect; disc_opts.onFailure = onDisconnectFailure; if ((rc = MQTTAsync_disconnect(client, &disc_opts)) != MQTTASYNC_SUCCESS) { printf("Failed to start disconnect, return code %d\n", rc); rc = EXIT_FAILURE; goto destroy_exit; } while (!disc_finished) { #if defined(_WIN32) Sleep(100); #else usleep(10000L); #endif } destroy_exit: MQTTAsync_destroy(&client); exit: return rc; } * @endcode * @page tracing Tracing * * Runtime tracing can be controlled by environment variables or API calls. * * #### Environment variables * * Tracing is switched on by setting the MQTT_C_CLIENT_TRACE environment variable. * A value of ON, or stdout, prints to stdout, any other value is interpreted as a file name to use. * * The amount of trace detail is controlled with the MQTT_C_CLIENT_TRACE_LEVEL environment * variable - valid values are ERROR, PROTOCOL, MINIMUM, MEDIUM and MAXIMUM * (from least to most verbose). * * The variable MQTT_C_CLIENT_TRACE_MAX_LINES limits the number of lines of trace that are output * to a file. Two files are used at most, when they are full, the last one is overwritten with the * new trace entries. The default size is 1000 lines. * * #### Trace API calls * * MQTTAsync_traceCallback() is used to set a callback function which is called whenever trace * information is available. This will be the same information as that printed if the * environment variables were used to control the trace. * * The MQTTAsync_setTraceLevel() calls is used to set the maximum level of trace entries that will be * passed to the callback function. The levels are: * 1. ::MQTTASYNC_TRACE_MAXIMUM * 2. ::MQTTASYNC_TRACE_MEDIUM * 3. ::MQTTASYNC_TRACE_MINIMUM * 4. ::MQTTASYNC_TRACE_PROTOCOL * 5. ::MQTTASYNC_TRACE_ERROR * 6. ::MQTTASYNC_TRACE_SEVERE * 7. ::MQTTASYNC_TRACE_FATAL * * Selecting ::MQTTASYNC_TRACE_MAXIMUM will cause all trace entries at all levels to be returned. * Choosing ::MQTTASYNC_TRACE_ERROR will cause ERROR, SEVERE and FATAL trace entries to be returned * to the callback function. * * ### MQTT Packet Tracing * * A feature that can be very useful is printing the MQTT packets that are sent and received. To * achieve this, use the following environment variable settings: * @code MQTT_C_CLIENT_TRACE=ON MQTT_C_CLIENT_TRACE_LEVEL=PROTOCOL * @endcode * The output you should see looks like this: * @code 20130528 155936.813 3 stdout-subscriber -> CONNECT cleansession: 1 (0) 20130528 155936.813 3 stdout-subscriber <- CONNACK rc: 0 20130528 155936.813 3 stdout-subscriber -> SUBSCRIBE msgid: 1 (0) 20130528 155936.813 3 stdout-subscriber <- SUBACK msgid: 1 20130528 155941.818 3 stdout-subscriber -> DISCONNECT (0) * @endcode * where the fields are: * 1. date * 2. time * 3. socket number * 4. client id * 5. direction (-> from client to server, <- from server to client) * 6. packet details * * ### Default Level Tracing * * This is an extract of a default level trace of a call to connect: * @code 19700101 010000.000 (1152206656) (0)> MQTTClient_connect:893 19700101 010000.000 (1152206656) (1)> MQTTClient_connectURI:716 20130528 160447.479 Connecting to serverURI localhost:1883 20130528 160447.479 (1152206656) (2)> MQTTProtocol_connect:98 20130528 160447.479 (1152206656) (3)> MQTTProtocol_addressPort:48 20130528 160447.479 (1152206656) (3)< MQTTProtocol_addressPort:73 20130528 160447.479 (1152206656) (3)> Socket_new:599 20130528 160447.479 New socket 4 for localhost, port 1883 20130528 160447.479 (1152206656) (4)> Socket_addSocket:163 20130528 160447.479 (1152206656) (5)> Socket_setnonblocking:73 20130528 160447.479 (1152206656) (5)< Socket_setnonblocking:78 (0) 20130528 160447.479 (1152206656) (4)< Socket_addSocket:176 (0) 20130528 160447.479 (1152206656) (4)> Socket_error:95 20130528 160447.479 (1152206656) (4)< Socket_error:104 (115) 20130528 160447.479 Connect pending 20130528 160447.479 (1152206656) (3)< Socket_new:683 (115) 20130528 160447.479 (1152206656) (2)< MQTTProtocol_connect:131 (115) * @endcode * where the fields are: * 1. date * 2. time * 3. thread id * 4. function nesting level * 5. function entry (>) or exit (<) * 6. function name : line of source code file * 7. return value (if there is one) * * ### Memory Allocation Tracing * * Setting the trace level to maximum causes memory allocations and frees to be traced along with * the default trace entries, with messages like the following: * @code 20130528 161819.657 Allocating 16 bytes in heap at file /home/icraggs/workspaces/mqrtc/mqttv3c/src/MQTTPacket.c line 177 ptr 0x179f930 20130528 161819.657 Freeing 16 bytes in heap at file /home/icraggs/workspaces/mqrtc/mqttv3c/src/MQTTPacket.c line 201, heap use now 896 bytes * @endcode * When the last MQTT client object is destroyed, if the trace is being recorded * and all memory allocated by the client library has not been freed, an error message will be * written to the trace. This can help with fixing memory leaks. The message will look like this: * @code 20130528 163909.208 Some memory not freed at shutdown, possible memory leak 20130528 163909.208 Heap scan start, total 880 bytes 20130528 163909.208 Heap element size 32, line 354, file /home/icraggs/workspaces/mqrtc/mqttv3c/src/MQTTPacket.c, ptr 0x260cb00 20130528 163909.208 Content 20130528 163909.209 Heap scan end * @endcode * @endcond */ #if defined(__cplusplus) } #endif #endif